LPOR: PULL-OUT RACK
The LPOR pull-out design provides easier access to equipment installed in a cabinet or millwork. The rack slides forward on bottom rails to access the back of equipment, cables and wiring. The LPOR features a 14-gauge steel base and 11-ga. steel corner post rails, tapped 10-32. Ships unassembled (two cartons).
- Rack can be mounted flush or recessed up to 2 inches in boxed wall or cabinetry
- Two or four bottom rails support different loads
- After equipment is installed, the assembly can be secured with a screw-in front panel at the base
- Three cable lacing bars in rear
- Short side stiffeners add torsional rigidity. Obround holes promote clean cable management.
- Corner post mounting rails, tapped 10-32, feature a printed RU scale to facilitate gear-mounting. Rear rails are 7U on all models; front rail height varies.
- EIA, TIA, RoHS compliant
- Made in the USA with certified U.S. steel
Click on each Model for Data Sheet
| Model No. |
Load Capacity lbs. [kg.] |
RU* | Overall Depth in. [mm] |
Overall Height in. [mm] |
Overall Width in. [mm] |
|---|---|---|---|---|---|
| LPOR2-719 | 125 [56.6] | 7 | 19.22 [488] | 14.12 [359] | 19.06 [484] |
| LPOR2-1019 | 125 [56.6] | 10 | 19.22 [488] | 19.37 [492] | 19.06 [484] |
| LPOR2-1219 | 125 [56.6] | 12 | 19.22 [488] | 22.87 [581] | 19.06 [484] |
| LPOR2-1419 | 125 [56.6] | 14 | 19.22 [488] | 26.37 [670] | 19.06 [484] |
| LPOR2-1619 | 125 [56.6] | 16 | 19.22 [488] | 29.87 [759] | 19.06 [484] |
| LPOR2-2119 | 125 [56.6] | 21 | 19.22 [488] | 38.62 [981] | 19.06 [484] |
| LPOR4-719 | 250 [113.3] | 7 | 19.22 [488] | 14.12 [359] | 19.06 [484] |
| LPOR4-1019 | 250 [113.3] | 10 | 19.22 [488] | 19.37 [492] | 19.06 [484] |
| LPOR4-1219 | 250 [113.3] | 12 | 19.22 [488] | 22.87 [581] | 19.06 [484] |
| LPOR4-1419 | 250 [113.3] | 14 | 19.22 [488] | 26.37 [670] | 19.06 [484] |
| LPOR4-1619 | 250 [113.3] | 16 | 19.22 [488] | 29.87 [759] | 19.06 [484] |
| LPOR4-2119 | 250 [113.3] | 21 | 19.22 [488] | 38.62 [981] | 19.06 [484] |
